Nut plates for door hinges

0 Members and 1 Guest are viewing this topic.

Offline landymike

  • LRSOC Member
  • Location: bristol
  • Posts: 47
Nut plates for door hinges
- Mar 22, 2018 - 07:00
Been looking to try and buy the nut plates to secure the middle door hinges on my 88, the part number is 302806 (its item 15 on page 241 in the green parts catalogue) - Does anyone know where to buy them or have any for sale ? Cheers mike


Sent from my iPad using LRSOC

Offline davidh2019

  • LRSOC Member
  • Location: Berkshire,UK
  • Posts: 406
Re: Nut plates for door hinges
Reply #1 - Mar 22, 2018 - 07:45
I bought my door hinge captive nut plates for my 86" from Radfords so I'd  recommend contacting them.


Online daleradford Trade (Legend Advertiser)

  • LRSOC Member
  • bodgers beware
  • Location: Aberdeenshire, Scotland
  • Posts: 3992
Re: Nut plates for door hinges
Reply #2 - Mar 22, 2018 - 09:19

Try Frank Mell as he bought the laser cut blanks off me, or L.R. Fasteners as he had thousand off me about 10 years ago.


Dale

Offline landymike

  • LRSOC Member
  • Location: bristol
  • Posts: 47
Re: Nut plates for door hinges
Reply #3 - Mar 22, 2018 - 19:07
Hi Thanks for the info i have tried LR fasteners and they havenít got any , so will try Frank Mell , How do i contact him does he have a company or email ? Regards mike


Sent from my iPad using LRSOC

Offline spannerthumbs

  • Non-Member
  • Location: Bristol, UK
  • Posts: 1
Re: Nut plates for door hinges
Reply #4 - Jun 13, 2021 - 22:32
I know its a few years ago but did you ever locate any nut plates?
Rob

Offline Mark Edmunds

  • LRSOC Member
  • Engine overhaul, Overdrive and Gearbox sorted...
  • Location: Leicestershire, UK
  • Posts: 2407
Re: Nut plates for door hinges
Reply #5 - Jun 14, 2021 - 09:43
Rob -

Dale and Carl Radford sell these...

Mark

Offline scimart

  • LRSOC Member
  • Location: Bedfordshire, UK
  • Posts: 503
Nut plates for door hinges
Reply #6 - Jun 14, 2021 - 10:50
I flattened the remnants of one of mine and used it as a pattern to make a set. I silver soldered stainless nuts to the plate as a bonus for someone in the future...


Sent from my iPhone using LRSOC

 

SimplePortal 2.3.6 © 2008-2014, SimplePortal